Tilers – Auckland

Why professional tiling matters

Tiling looks simple until grout lines wander or water finds its way behind the surface. A qualified Auckland tiler brings laser-guided layouts, substrate preparation, waterproofing expertise and a deep understanding of New Zealand standards. Their know-how prevents cracked tiles, failed membranes and costly rework, protecting both your investment and the building envelope.

Key services offered by Auckland tilers

• Floor & wall tiling: ceramic, porcelain, stone and terrazzo for bathrooms, kitchens, living areas and exteriors.
• Mosaic & feature installations: intricate patterns, niches and borders that elevate architectural detail.
• Waterproofing & tanking: wet-area membranes and vapour-barriers installed to E3/AS1 compliance.
• Under-tile heating: electric systems embedded under screed for warm, dry floors.
• Tile removal & levelling: demolition, substrate grinding and self-levelling compounds to create a perfectly flat canvas.

Popular tile materials & where they excel

• Ceramic: affordable and easy to cut, ideal for splashbacks and light-traffic floors.
• Porcelain: dense, low absorption and suitable for high-traffic commercial areas.
• Natural stone: marble, travertine and slate offer unique character but need sealing.
• Terrazzo & concrete tiles: on-trend large formats that create seamless, contemporary spaces.
• Wood-look planks: porcelain alternatives to hardwood for wet zones.

How much do tilers cost in Auckland?

Rates vary with tile type, site access, layout complexity and whether waterproofing or levelling is required. As a guide, labour starts around $55–$75 per square metre for straight-lay ceramic and can exceed $120 per square metre for large-format stone that demands additional handling. Waterproofing is typically priced separately at $25–$45 per square metre, while materials (adhesives, grout, trims) add another 10–15 % to the total. Always request an itemised quote so you can compare apples with apples.

Choosing the right tiler

Price alone should not determine your choice. Look for:

• Proven portfolio of similar projects.
• Membership of industry bodies or producer statements for waterproofing.
• Clear written quote outlining scope, materials and timeline.
• Willingness to coordinate with other building & construction professionals.

Typical project timeline

1. Site measure & quote: 1–2 days.
2. Substrate preparation: 1–3 days depending on levelling and waterproofing.
3. Tiling & grouting: 1–5 days for an average bathroom.
4. Cure & final clean: 24–48 hours before the area can be used.

Caring for your tiled surfaces

Quality installation deserves good maintenance. Discuss the following with your tiler:

• Epoxy vs cementitious grout and recommended sealers.
• Expansion joints for patios and sun-drenched rooms.
• PH-neutral cleaners to protect finishes.
• Annual inspection of silicone joints in showers.

Related trades you may need

A quality finish often relies on coordination with adjacent specialists. Explore:

• Waterproofers
• Plumbers & Gas Fitters
• Electricians
• Painters
• Bricklayers
• Stonemasons
• Plasterers & Renderers
• Insulation Installers
• Roofing Contractors
• Scaffolders

Compliance & quality assurance

Under the NZ Building Code, wet-area tiling must meet the moisture-control requirements of Clause E3. The E3/AS1 Acceptable Solution sets out substrate preparation, membrane installation and ventilation standards. Engage a tiler who can issue a PS3 or equivalent producer statement to document compliance and protect your warranty.

Ready to start? Short-list, compare and contact Auckland’s best tilers on ArchiPro today.