Decoflame Net Zero Fireplaces: custom colours for F3 & F6 (and truly bespoke) from $495–$695

13 October 2025

164.7K profile views
18 saves

Decoflame’s F3 and F6 BEV Net Zero Fireplaces® Net Zero Fireplaces can be finished in customer-specified colours for just $495–$695, with full bespoke colours, shapes, and sizes available to suit any feature wall or design brief. Powered electrically (no natural gas line required) and app-connected, Decoflame leads the market in electric-connected BEV NetZero fireplace technology that’s safe, flexible, and designed for modern architecture.

Visit Website

Why colour matters for a Net Zero showpiece

A fireplace is the room’s heartbeat, so its finish should harmonise with your palette, materials, and lighting. Decoflame’s Danish made F3 & F6 let you match RAL, matte, satin, or textured looks so the frame, fascia, and glass hardware feel “built-in,” not bolted on. The result is a clean, modern line with real flame, minimal construction complexity, and zero natural-gas connection.

What you can customise (fast)

· F3 & F6 standard models — custom colour add-on: $495–$695. Choose a customer colour (e.g., popular RALs, deep charcoals, warm neutrals, architectural whites).

· Bespoke options beyond colour: Custom shapes & lengths (to align to reveals, stone modules, or millwork); made-to-measure fascias and three-sided high glass fenders; hardware finishes that complement stone, timber, or metalwork.

· Smart control as standard: App + remote + Wi‑Fi/Bluetooth on F-Series; simple daily use, scheduling, and safety interlocks.

· No gas, no flue: All-electric, BEV® vapor combustion with real flame and low-impact installation.

Design tip: Finalise paint/stone samples and lighting temperature before you lock the RAL—colours shift visually under warm LED.

The Decoflame difference (why they lead)

· Electric-connected BEV® engine – precise, sensor-managed vapor combustion for a clean, controllable flame.

· Installation agility – no natural gas, no flue, and flexible cavity options make F3/F6 ideal for apartments, multi-res, and retrofits.

· Design-first manufacturing – Danish fabrication with short custom lead times for colours and trims.

· Real project support – guidance on clearances, glass offsets, and mounting on stone or feature walls.

Pricing & lead time (at a glance)

Custom colour add-on (F3 & F6) $495–$695. Customer RAL on visible trims/fascia

Final price depends on parts finished and surface area

Bespoke colour/shape, Non-standard lengths, shapes, special fascias

Quoted on Request

Ability to have Glass fender brackets & High 3-sided glass + mounts

custom colour match available

(Ask for the current lead time when ordering—colour finishing and bespoke cuts add minimal time if specified early.)

How to brief your custom order (3 steps)

1. Confirm the cavity: width × height × depth, substrate (e.g., stone veneer over studs), and any TV/joinery above.

2. Pick your colour: provide exact RAL or a sprayed sample; decide on matte/satin/textured.

3. Send elevations/photos: a quick markup helps Decoflame align trim breaks, bracket positions, and glass clearances.

Specs that matter to architects & builders

· Fuel & power: Electric connected BEV Net Zero Fireplaces®; no natural gas; standard GPO; auto-refuel pump compatible.

· Controls: App (Wi‑Fi/Bluetooth), remote, multi-sensor safety.

· Install: No flue; observe manufacturer clearances (e.g., glass set-back, vertical free-air zone).

· Finishes: Customer RAL on trims/fascia; hardware colour-matched on request.

· Compliance mindset: Follow local building guidelines for non-combustible areas around the opening and electrical isolation.

Pros & considerations

Pros:

Real flame, no natural gas, no flue

Colour accuracy depends on correct RAL and lighting—approve a sample if possible

Custom colours $495–$695 keep budgets tidy

Bespoke shapes/lengths require drawings (adds quoting time)

App-connected, schedule-ready

Coordinate with joinery and stone early to hide fixings

Danish build quality with design-centric trims

Lead time for special finishes—order early in the program

FAQs (people also ask)

Can I match a specific RAL or brand paint?

Yes—provide the exact RAL (or a target brand code with a RAL nearest-match). Satin or matte is most popular for fireplaces.

Does a custom colour affect heat or safety?

No—the colour is on exterior trims/fascia. Always keep Decoflame clearances around the flame and glass.

Can you colour-match glass brackets/hardware?

Yes—request colour-matched hardware to keep the assembly visually quiet against stone or timber.

Is there any smell or gas line needed?

No natural gas required. BEV Net Zero Fireplaces® vapour combustion is sensor-managed and electrically connected; follow the manual for ventilation/room sizing norms.

What if my wall is stone veneer?

Fix through to structure—don’t rely on veneer alone. Decoflame or your installer can specify anchors and spacers.

How long is the lead time for a coloured F3/F6?

Usually only modestly longer than standard finishes; confirm at order placement.