Boss Ablative Coating
by CSR Potter Interior Systems
Auckland
- 403.8K profile views
- 52 saves
Boss Ablative Coating has been developed to seal BOSS Batts once installed in apertures. Once the Ablative Coating is applied it prevents the passage of fire and smoke between fire rated compartments, giving up to 4 hour fire resistance in blank openings and around metallic pipes, cables, cable trays, HVAC ducts and dampers. BOSS Ablative Coating is tested and approved to AS1530.4, AS4072.1 and BS/EN1366.3.
Ablative Coating is a water based acrylic coating, having excellent fire and electrometric properties. At normal temperatures, it remains flexible to permit thermal and mechanical movement of the services. The product is unaffected by oil, fungus, moisture, vermin, contain no halogens or asbestos and contains no VOCs.
Product Details
- Product
- Boss Ablative Coating
- Category
- Adhesives and Sealants
- Sold by
- CSR Potter Interior Systems
- Brand
- BOSS
CSR Potter Interior Systems is specified by
Chow:Hill ArchitectsArchitects
RTA StudioArchitects
Studio Pacific ArchitectureArchitects
T Plus ArchitectsArchitects
Matt Brew ArchitectArchitects
Fat Parrot ArchitectureArchitects
DLA ArchitectsArchitects
YokeArchitects
Origin HeritageArchitects
architecture+Architects
Designgroup Stapleton ElliottArchitects
Bob Burnett ArchitectureArchitectural Designers
New Zealand Green Building CouncilAssociations
Arc AtelierArchitectural Designers
GS Cayless ConstructionBuilders
CTRL SpaceInterior Designers
Elevate Architectural TransportablesBuilders
FocusplanInterior Designers
Lightforge PhotographyPhotographers
MnM DesignArchitectural Designers
Creative ArchArchitectural Designers
VADAInterior Designers
AD ArchitectureArchitectural Designers
Mark Scowen PhotographyPhotographers
Metro Commercial InteriorsConstruction
Boss Ablative Coating has been developed to seal BOSS Batts once installed in apertures.
Once the Ablative Coating is applied it prevents the passage of fire and smoke between fire rated compartments, giving up to 4 hour fire resistance in blank openings and around metallic pipes, cables, cable trays, HVAC ducts and dampers. BOSS Ablative Coating is tested and approved to AS1530.4, AS4072.1 and BS/EN1366.3.
Ablative Coating is a water based acrylic coating, having excellent fire and electrometric properties. At normal temperatures, it remains flexible to permit thermal and mechanical movement of the services. The product is unaffected by oil, fungus, moisture, vermin, contain no halogens or asbestos and contains no VOCs.
- Specs
- Life expectancy of over 25 years
- Can be spray, brush or trowel applied
- Suitable for indoor use without additional environmental protection
- Fire Resistant testing to AS1530.4 to 4 hrs and EN1366-3 to 240mins
- Tested in block wall, concrete, masonry, plasterboard partition, composite panel, durasteel wall & speed panel
Downloads
Downloads (4)4 Direct downloads • 6 Available on request
Frequently asked questions about
Boss Ablative Coating
The Boss Ablative Coating is supplied by CSR Potter Interior Systems. It is also on their website, and you can browse every product CSR Potter Interior Systems lists on ArchiPro.
CSR Potter Interior Systems does not publish a price for the Boss Ablative Coating on ArchiPro. for pricing, or visit their website.
It is listed under Adhesives and Sealants on ArchiPro, where you can compare it with adhesives and sealants from other suppliers.
Yes. CSR Potter Interior Systems provides spec sheets for it, in the Downloads section above, alongside an ArchiPro spec sheet. More of their files are on their downloads page.
from this page, see their contact details on ArchiPro, or visit their website. The CSR Potter Interior Systems profile on ArchiPro has the rest of their products.
More products from
CSR Potter Interior Systems
The rest of this range, and everything else CSR Potter Interior Systems makes.
More in
Adhesives and Sealants
Everything else in Adhesives and Sealants, from every supplier on ArchiPro.
