Flush Fit Curtain Track

By Vanda
Website

Flush Fit Track is a track recessed into the ceiling. The track sits inside the ceiling lining and requires no brackets for installation. Flush Fit track is 13mm high which is the standard thickness of ceiling lining sheet used in New Zealand (GIB) and Australia (Gyprock).

Builders need to allow for a parallel gap of 18mm in the ceiling sheet to accommodate the track width. The track has a 5mm flange either side of the glide channel for the cut edge of the ceiling sheet to sit on, making for a superior finish.

The track length is available in continuous 6-meter lengths. When installations exceed 6 meters, tracks need to butt together. The track can be custom bent from anywhere between 180°-90° angle with a 150mm Bend Radius. We can supply bent pieces of track to builders in preparation for final installation to get the ceiling lining cut accurately and correctly.

There is a choice of standard glides and end stops for pleated style curtain headings or the Vanda Wave Heading, please contact our office for further details.

Flush Fit track is supplied pre-drilled at 500mm centres and has a screw head rebate running through the entire length of the track. We supply pan square self tapper screws. Installers need a No. 1 square drive bit.

Tracks are cut 11mm shorter than the given length so that access to the glides is possible without having to take down the track.

Fitters are to position one end of the track hard up to one end to allow the 11mm gap at the other. The cover plate attached to the end stop
covers the gap.

Flush Fit track comes in our standard “Classic White” and can also be custom powder-coated to suit - POA

Details
  • Category
    Curtain Rails & Tracks
Get in touch
Visit Website

About the
Seller

  • Products listed

    104

  • Recent Responsiveness

    60%

    Usually responds within
    3 days on weekdays

Vanda Holdings is a Manufacturer, Wholesaler and Distributor of Custom made Curtain Hardware, Roller and Roman Blinds, specialising in Automated products.

At Vanda, our passion for excellence and precision is at the heart of all our custom-made products. We strive to provide a superior service, every time, and our commitment to delivering high-quality products is something we take very seriously. Our innovative and exciting range of products are designed and manufactured in New Zealand, providing you with a locally sourced, bespoke solutions.

For those looking for something extra special, we provide motorised tracking systems and roller blinds, offering the full range of control options for both building management systems, or stand alone. We also offer the complete package - with measuring and installation services.

Following is an overview of our products:

Curtain Hardware
Manufacturers and Suppliers of quality, customised, decorative Curtain Rods, Tracks and Accessories. Our extensive collection offers a variety of products to suit any decor.

Blinds
Specialists in high quality custom made Roller and Roman Blinds, using a large selection of sunscreen, translucent and blockout fabrics. Our product suite is extensive, offering venetians, external Blinds and Skylight Blinds.

Motorised Systems
Motorised Tracks - Multiple systems available from entry level model to high spec full flexibility systems for building management or remote control operation. Complex bending and radius fabrication capabilities for motorised tracks.

Motorised Roller Blinds – Entry level motors available in battery driven and electric operation through to high spec Somfy motors for all applications, with full range of control options for building management system or stand alone.

Please contact our office on 0800 826 326 to discuss your requirements or to arrange an appointment.