HB1475 310mm Offset Flush Pull

• Designed for large sliding, bi-fold or pivot doors where a generous flush pull is required for ease of operation and visual presence.
  • Ideal for timber or aluminium doors with sufficient thickness (minimum 33 mm back-to-back use, or 42 mm when paired with an end pull) — allows for the hardware body to be fully recessed.
  • Best suited for projects where both function (ease of pull) and form (architectural statement hardware) are needed—e.g., residential entries, commercial interiors, high-end fit-outs.
  • Compatible with the broader hardware series from Halliday + Baillie for coordinated aesthetic across door systems. 

Material: Solid brass

Flush pulls : 310mm x 50mm x 15mm

Suitable for timber or aluminium doors. HB1410 timber fixing kit to be ordered separately for use on timber doors.

For finish options please see our current finishes sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.

Flush pulls are designed to be mounted with the body within the thickness of the door, and the face plate on the door surface – total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee.

• Dimensions: 310 mm (length) × 50 mm (width) × ~15-16 mm (overall depth) with ~14 mm internal finger depth.
  • Material: Solid brass body. 
  • Minimum door thickness: 33 mm if used back‐to‐back with no end pull, 42 mm if used back‐to‐back with an HB680 end pull. 
  • Handed: Available in both left‐hand and right‐hand versions (due to the offset grip) 
  • Suitable for timber or aluminium doors. For timber doors a separate timber fixing kit (HB1410) is required.