Skip to main content

AccuThermax™ Phenolic PPS

by Accumen Shapes

Auckland

Accumen Shapes logo
  • 290.2K profile views
  • 61 saves
Visit Website

AccuThermax™ Phenolic PPS is a rigid, closed-cell, fibre-free phenolic foam preformed pipe section with a factory-applied aluminium foil vapour barrier jacket, fabricated in New Zealand by Accumen Shapes Ltd from imported phenolic foam at a nominal density of 40 kg/m³. It insulates chilled water, heating, refrigeration and low-temperature process pipework from -180 to +120 degrees C, and it has its own Masterspec work section: 7642AP Accumen Phenolic Pipe Insulation.

A declared aged lambda of 0.023 W/m·K at 15 degrees C to AS/NZS 4859.1:2018 (BRANZ Thermal Assessment DC20033-01-3) means a thinner wall for the same R-value, and more usable space around the pipe. Foil-faced sections are classified Euroclass BL-s1,d0 to EN 13501-1 (Efectis Nederland 2014-Efectis-R0155l, wall 0 to 50 mm and outer diameter to 300 mm), with AS/NZS 1530.3 indices of 0 / 0 / 0 / 0-1 (AWTA 24-000414 and 24-000417).

The foam core carries no added halogenated flame retardants and no added chlorides, and its VOC emissions are tested to the DIBt / AgBB scheme. Suitability for specific pipework, stainless steel, copper, carbon steel, multilayer and plastic alike, is subject to system design and the management of corrosion under insulation, so talk to Accumen Technical Services on metal-contact work. The service range runs from -180 to +120 degrees C, covering cryogenic through to low-temperature process duty.

Sections are cut here, so bore and wall thickness come to the project's sizes on short lead times. Accumen will prepare a Project Thickness Schedule before tender, setting the wall for each pipe size against the minimum R-value required.

AccuThermax™ Phenolic PPS

AccuThermax™ Phenolic PPS is a rigid, closed-cell, fibre-free phenolic foam preformed pipe section with a factory-applied aluminium foil vapour barrier jacket, fabricated in New Zealand by Accumen Shapes Ltd from imported phenolic foam at a nominal density of 40 kg/m³. It insulates chilled water, heating, refrigeration and low-temperature process pipework from -180 to +120 degrees C, and it has its own Masterspec work section: 7642AP Accumen Phenolic Pipe Insulation.

A declared aged lambda of 0.023 W/m·K at 15 degrees C to AS/NZS 4859.1:2018 (BRANZ Thermal Assessment DC20033-01-3) means a thinner wall for the same R-value, and more usable space around the pipe. Foil-faced sections are classified Euroclass BL-s1,d0 to EN 13501-1 (Efectis Nederland 2014-Efectis-R0155l, wall 0 to 50 mm and outer diameter to 300 mm), with AS/NZS 1530.3 indices of 0 / 0 / 0 / 0-1 (AWTA 24-000414 and 24-000417).

The foam core carries no added halogenated flame retardants and no added chlorides, and its VOC emissions are tested to the DIBt / AgBB scheme. Suitability for specific pipework, stainless steel, copper, carbon steel, multilayer and plastic alike, is subject to system design and the management of corrosion under insulation, so talk to Accumen Technical Services on metal-contact work. The service range runs from -180 to +120 degrees C, covering cryogenic through to low-temperature process duty.

Sections are cut here, so bore and wall thickness come to the project's sizes on short lead times. Accumen will prepare a Project Thickness Schedule before tender, setting the wall for each pipe size against the minimum R-value required.

Specs
  • Product Type: Pre-formed rigid phenolic foam pipe insulation
  • Material: Closed-cell, fibre-free phenolic foam with aluminium foil vapour barrier
  • Density: 40 kg/m³
  • Standard Length: 1000 mm
  • Pipe Diameters: to specification. The declared R-value schedule covers 6 to 610 mm outside diameter, and the EN 13501-1 classification applies to a maximum outer insulation diameter of 300 mm
  • Wall Thicknesses: to specification. The declared R-value schedule covers 20 to 100 mm, and the fire classification applies to walls up to 50 mm
  • Operating Temperature Range: -180 °C to +120 °C
  • Thermal Conductivity:
    Aged 0.023 W/m·K at 15 °C (AS/NZS 4859.1:2018 / EN 13166; BRANZ Thermal Assessment DC20033-01-3)
  • Fire Performance:
    Group Number: 1-S equivalence, correlated from EN 13501-1 via MBIE Building Product Specifications Table 8.5.3.1A, not an ISO 9705 test
    EN 13501-1: BL-s1,d0 foil-faced, wall 0 to 50 mm and outer diameter to 300 mm (Efectis Nederland 2014-Efectis-R0155l); C-s1,d0 plain foam and preformed elbows
    AS/NZS 1530.3:
    Ignitability: 0
    Spread of Flame: 0
    Heat Evolved: 0
    Smoke Developed: 0 to 1 (AWTA 24-000414 and 24-000417)
  • Closed Cell Content: >95% (EN ISO 4590)
  • Foil Emittance: 0.04 (ASTM C1371)
  • Compressive Strength: ≥150 kPa at 10% yield (AS 2498.3-1993). Not a structural product
  • Water Vapour Transmission: <500 µg/m²·s (AS 2498.5-1993)
  • VOC Emissions: foam core tested to the DIBt / AgBB scheme 2015, complies
  • Environmental Performance:
    CFC/HCFC-free blowing agents
    Low Ozone Depletion Potential (ODP)
    Low Global Warming Potential (GWP)
  • Durability:
    Contributes to NZBC B2 15-year durability when installed to manufacturer’s instructions
  • NZBC Compliance Contribution:
    B2 Durability
    C3.4(a) Protection from Fire
    F2 Hazardous Building Materials
    H1 Energy Efficiency
Features
  • High-performance rigid phenolic foam insulation with a nominal density of 40 kg/m³
  • Factory-applied aluminium foil vapour barrier jacket
  • Very low thermal conductivity (as low as 0.023 W/m·K at 15 °C)
  • Closed-cell structure exceeding 95%
  • NZBC Group Number 1-S equivalence for the foil-faced section, correlated from EN 13501-1 via MBIE Building Product Specifications Table 8.5.3.1A
  • Euroclass BL-s1,d0 to EN 13501-1, foil-faced, walls to 50 mm (plain foam and elbows are C-s1,d0)
  • Foam core with no added halogenated flame retardants and no added chlorides
  • Wide service temperature range, -180 to +120 degrees C
  • Lightweight and durable pre-formed sections
  • Fabricated in New Zealand, with bore, wall and length to specification

Benefits:

  • Delivers high thermal efficiency with reduced insulation thickness
  • Integrated vapour barrier minimises condensation and moisture ingress
  • Supports fire safety and regulatory compliance in building services applications
  • Used on stainless steel, copper, carbon steel, multilayer and plastic pipework, subject to system design
  • Faster and easier installation due to lightweight, pre-formed construction
  • Short lead times and sizes to the project, because sections are cut here
  • CFC-free and HCFC-free halogen-free blowing agent, with low Ozone Depletion Potential and low Global Warming Potential
Scope of use

AccuThermax™ Phenolic PPS is designed for the thermal insulation of pipework in building services and HVAC applications. It is suitable for use in commercial, industrial, and institutional buildings where high thermal performance, fire safety, and moisture resistance are required.

It is used on a range of pipework, in every case subject to system design and the management of corrosion under insulation:

  • Mild steel
  • Stainless steel
  • Carbon steel
  • Copper
  • Multilayer pipe
  • Plastic pipework

AccuThermax™ Phenolic PPS covers both low and high-temperature services, from -180 to +120 degrees C. Where the fire classification is relied on, keep foil-faced sections within 50 mm wall and 300 mm outer insulation diameter. It is not a structural product. Install to the AccuThermax™ Phenolic PPS Installation Guide and seal every joint with Accumen aluminium foil tape, because the taped joint is part of the tested fire and vapour performance.

Fire Compliance

The classifications below are the ones Accumen holds classification reports for. Accumen does not claim a Group Number from a direct ISO 9705 or AS 5637.1 test.

  • Group Number: 1-S equivalence for the foil-faced section, correlated from the EN 13501-1 classification via MBIE Building Product Specifications Table 8.5.3.1A
  • EN 13501-1 (Reaction to Fire):
    Euroclass BL-s1,d0, foil-faced section, wall 0 to 50 mm and outer diameter to 300 mm (Efectis Nederland 2014-Efectis-R0155l). Plain unfaced foam and preformed elbows are C-s1,d0
    Low smoke production (s1)
    No flaming droplets (d0)
  • AS/NZS 1530.3:
    Ignitability: 0
    Spread of Flame: 0
    Heat Evolved: 0
    Smoke Developed: 0 to 1 (AWTA 24-000414 at 25 mm and 24-000417 at 100 mm)

Installed to the AccuThermax™ Phenolic PPS Installation Guide, with every joint sealed in Accumen aluminium foil tape, the product may contribute to compliance with the New Zealand Building Code, including:

  • C3.4(a) Protection from Fire
  • F2 Hazardous Building Materials

Group Number is a wall and ceiling surface-finish classification. For pipe insulation the directly applicable classifications are EN 13501-1 (linear) BL-s1,d0 and AS/NZS 1530.3, with Group 1-S as supporting equivalence. The tested classification applies to the foil-faced section up to 50 mm wall with foil-taped joints. The EN 13501-1 classification of the 80 and 120 kg/m³ support inserts is pending.

Downloads

Downloads (9)9 Direct downloads • 4 Available on request

Get more Specific.

Accumen Shapes

accumen.co.nz

Visit the Accumen Shapes website for the full range, specification detail and where to buy this product.

Visit Website

Frequently asked questions about
AccuThermax™ Phenolic PPS

The AccuThermax™ Phenolic PPS is supplied by Accumen Shapes. It is also on their website, and you can browse every product Accumen Shapes lists on ArchiPro.

Accumen Shapes does not publish a price for the AccuThermax™ Phenolic PPS on ArchiPro. for pricing, or visit their website.

It is listed under Insulation on ArchiPro, where you can compare it with insulation from other suppliers.

Yes. It is part of the Thermal Solutions range from Accumen Shapes, where you can see every product in the range together.

from this page, see their contact details on ArchiPro, or visit their website. The Accumen Shapes profile on ArchiPro has the rest of their products.

Supplier Reviews

1 / 8

“Maddy at Accumen Shapes provided the best customer service I had working on the first season of Roman Empire. She went out of her way to assist us sourcing pieces for set decoration.”

Niki White - Roman Empire Ltd