Timber Joinery

• Wooden window joinery
• Interior doors
• Windows
• Skirtings
• Cabinetry
• Mouldings

On the other hand, outdoor applications also provide a lot of promise. They range from eye-catching posts and railings to decorative eaves. Meanwhile, most timber species are excellent for joinery systems, and specific care must be taken to select the suitable timber for a particular product and intended finish. The most practical choices for timber joinery are:

• Australian cypress
• Tasmanian oak
• Spotted gum 

There are multiple advantages of wood joinery on commercial or residential projects, which makes their use necessary. Here are some of the benefits of using wood joints: 

• It provides firmness to the frame
• It helps enhances the appearance
• It strengthens the parts by providing a frame
• It can be used along with plastic and steel joinery
• They can also be easily disassembled when required 
• They have multiple configurations to increase the strength of the joints, including using aluminium joinery, adding glue, grooves, and fasteners
• An adequately glued joint can offer higher durability and strength than a single wooden piece
• Even though glue and fasteners are known to hold joints together, timber joinery can also be implemented without them

Multiple types of timber frame joints can be found in everyday items, embellishments, furniture, and home fixtures. With that being said, here are the most common types of wood joinery:

A butt joint is usually fixed at the end of a timber board. It is made by placing two ends together at 90 degrees to form a corner. 

Most of the time, mechanical fasteners are used like screws or nails to increase sturdiness. They are commonly known as corner-wood joints and are typically used when building an attic or wall frame. 

In this type of joint, the carpenter joins two flat boards to form a larger wooden panel. One board has a long edge carved at the border, whereas the other has cut like a groove to receive the extended board. 

It is a secure option for furniture, flooring, and various similar applications which have high traffic. Furthermore, it can also be used to form a square joint. 

This type of joint is fitted at the end of two different pieces of timber to build a unified right angle. Next, a series of symmetrical slots are carved out to make rectangular projections resembling fingers. 

Once the connection is glued, these fingers are inserted in each other to form a permanent bond, creating a solid corner wood joint. 

This specific type of timber joinery is commonly used to join two wood pieces, making a longer board. As a result, the joint typically has a bigger glueing surface. 

Just like the box joint, fingers are cut into the board; however, these are much deeper than the former. 

While in the case of a box joint, a right angle is formed; whereas, in this type, the mating wood pieces are laid flat and assembled with a thin bit of wood glue between fingers. 

Just because wood joinery is sturdy does not mean that it will last without any maintenance. Therefore, like any other surface, timber joinery also needs regular care. 

Here are some simple tips that help with the maintenance of timber joinery, wooden doors, and window hardware:

• Under regular conditions, the joinery must be resealed and repainted every three years via sealants or oil-based paints
• Timber and uPVC joinery can be scratched while cleaning. Ensure that the cleaning rags do not have any grit on them, remove rings from fingers and be careful with the scraping devices. The timber surface must be washed down with mild detergent and soft cloth and then rinsed off via clean water
• Never use solvents
• In areas with higher elemental exposure, more frequent maintenance will be needed. Check with the paint supplier for a lifetime maintenance program if they have any
• Ensure that there is no excessive condensation since it can lead to structural deterioration and mould growth
• Keep the bottom tracks clean, use a dry silica-based lubricant if needed, wipe with a cloth, lightly grease the oil hinges and top tracks. Doing this will ensure smooth action and increase the hardware’s lifespan
• Windows and doors will need appropriate weatherproofing and cleaning, depending on the exposure level

Timber joinery is usually used to give a unique structural appearance to the frame while portraying wood’s natural beauty without any distractions. 

It exhibits a higher degree of craftsmanship by providing an extraordinary visual aesthetic.