Natural Bamboo Panel | Joinery Plywood

• Natural or Coffee
• Fine grain, smooth finish
• 0.14% per 1% change in moisture content
• D3 water resistant, laminated panel

Other Performance Attributes

• FSC certified
• D3 water resistant, laminated panel
• 0.14% per 1% change in moisture content
• 30% harder than oak and 17% harder than maple

Bamboo despite being a durable product is still vulnerable to moisture and UV. Consequently it is the users responsibility to ensure the lacquer or coating system used gives the product necessary protection from moisture and for the desired performance.

Sheet size:

• Sandwich/Vertical:
  • 2440x1220: 15mm, 18mm, 20mm, 30mm, 40mm
  • 3000x1220: 18mm
• Sandwich/Compressed:
  • 2440x1220: 15mm, 18mm, 20mm, 40mm

Water resistant decorative ply suitable for interior use:

• Decorative linings
• Cabinetry
• Bench and bar tops
• High-end joinery
• Furniture and vanities

Limitations on Use

• Not suited to exterior use

Bamboo despite being a durable product is still vulnerable to moisture and UV. Consequently it is the users responsibility to ensure the lacquer or coating system used gives the product necessary protection from moisture and for the desired performance.

This is a natural product that can be affected by changes in weather conditions: moisture and temperature. Increased moisture content temperature variation may cause internal stresses causing previously flat sheets to bow. At Plymasters precautions are taken to minimise this effect. However, once the panel has left the warehouse Plymasters cannot guarantee sheets to remain flat unless fastened. This is particularly important where free standing kitchen/cabinet doors are concerned. When storing panels, stack on a firm raised base with enough support to prevent sagging. Cover the pallet to protect top and edges.

View this product in an interactive rendered panel