Outdoor Lamps

• Accent lighting – Small beam spots to emphasise trees, sculptures or façade textures.
• General illumination – Up-lights or post lamps that cast a wide spread over decks and courtyards.
• Way-finding – Bollards and path lights that mark edges and minimise glare.
• Security – Motion-activated wall lamps near entries and garages.

Defining the task narrows down wattage, beam angle and mounting height before aesthetics enter the equation. An outdoor heat lamp is intended to provide radiant warmth, so account for its heat output and clearances separately from the illumination plan.

New Zealand’s rain, salt air and UV can quickly degrade poorly sealed fixtures. Look for an IP rating of at least IP44 for covered areas and IP65+ for exposed zones. If the lamp is within reach of potential impact (e.g. driveway bollards), check the IK rating for impact resistance. An outdoor fire lamp may need separate consideration for fuel storage, ventilation and clearance from surrounding planting or structures.

• Powder-coated aluminium – Lightweight, cost-effective, suits most regions.
• Marine-grade stainless steel (316) – Best for coastal sites where salt spray accelerates corrosion.
• Solid brass or copper – Develops a stylish patina and withstands harsh weather for decades.
• UV-stable polymers – Great for contemporary styles and areas prone to chemical exposure such as pool sides.

LED is now the default thanks to low energy use and long life. Select colour temperatures between 2700K (warm) and 4000K (neutral) to complement exterior finishes. If you prefer zero wiring, consider solar lights with integrated panels and batteries.

Plan cable runs early and engage a registered electrician to ensure compliance with NZ Building Code G9. Where cabling is difficult, low-voltage systems or solar options reduce trenching and consent requirements. When replacing a fitting, check that the outdoor lamp holder is compatible with the lamp’s voltage, base and exposure rating.

Whether you favour mid-century lanterns, minimalist cylinders or rustic farmhouse sconces, you’ll find matching options within our outdoor lights collection. Popular finishes include matte black, aged brass and powder-coated whites that pair with New Zealand’s contemporary weatherboard and concrete homes. Modern outdoor floor lamps suit decks and terraces where a broader pool of light is needed without fixing a fitting to the wall.

Combine standalone lamps with fixture types that solve specific lighting challenges:

• Outdoor wall lights for entryways and façades.
• Garden lights to highlight planting beds and trees.
• Outdoor ceiling lights for covered patios and verandas.

• Position path lamps 2–3 m apart for even spread.
• Angle accent spots at 30° to minimise glare.
• Use warm dim drivers where mood flexibility is desired.
• Test night-time placement with a temporary torch before fixing.

Quality LEDs can last 50,000+ hours. Rinse enclosures with fresh water twice yearly, especially in coastal areas, and inspect seals to avoid moisture ingress. Replace gaskets immediately if cracking appears.

Expect to invest from $80 for simple bollards to $600+ for designer architectural lamps. Factor in professional installation costs, especially for mains-voltage fixtures.

Ready to brighten your outdoors? Browse ArchiPro’s curated outdoor lamp range, compare specifications side by side and connect directly with New Zealand’s most respected lighting suppliers.