Plasterboard & Interior Lining Installers — Taranaki

Why engage a specialist plasterboard installer?

Plasterboard (often called GIB in New Zealand) is the backbone of most interior walls and ceilings. Getting it wrong can lead to cracked linings, failed fire ratings or costly rework. A specialist installer brings:

• Local expertise – Familiarity with Taranaki’s seismic zone and high-wind areas.
• Code compliance – Knowledge of the New Zealand Building Code including Clauses B2 (Durability) and C (Fire Safety).
• Flawless finishes – Accurate fixing, jointing and stopping that minimises visible lines under critical lighting.
• Streamlined scheduling – Coordination with electricians, plumbers and other trades to keep your programme on track.

Key plasterboard systems to consider

Standard wall linings

The go-to 10–13 mm boards suit most residential walls. Look for installers who can advise on screw spacing, back-blocking and control joints—particularly important in Taranaki’s variable humidity.

Ceiling linings

Long-span ceiling boards reduce joins and are ideal for modern open-plan living. Experienced crews know when to batten or direct-fix to rafters.

Wet-area boards

Bathrooms and laundries demand moisture-resistant linings plus waterproofing membranes. A certified installer will ensure compatibility with your chosen waterproofer.

Fire-rated and acoustic systems

From inter-tenancy walls to commercial fit-outs, fire and sound-control boards deliver performance only when installed exactly to specification—no shortcuts.

Typical installation workflow

1. Site measure & board selection – Confirms sheet sizes, bracing and penetrations.
2. Delivery & acclimatisation – Boards rest on-site 24 hours to match indoor moisture levels.
3. Fixing – Screws or nails at prescribed centres; adhesive alone is never enough for compliance.
4. Taping & stopping – At least three coats, sanded between layers for a Level 4 or Level 5 finish.
5. Final inspection – Joint alignment, screw pops and surface flatness are checked under raking light.

Budget guide

Expect labour and materials to range from $30–$55 per m² for standard walls, climbing to $75 per m² for high-spec acoustic or fire-rated systems. Quotes should specify board type, finish level and any scaffolding or access costs.

Questions to ask your Taranaki installer

• Are you an NZQA-qualified GIB fixer and stopper?
• Can you provide recent local projects I can view?
• How do you handle movement joints for timber-framed homes?
• What warranty do you offer on workmanship and defects?

Related trades you may also need

Seamless interiors rely on a coordinated team. Explore other building & construction professionals who regularly collaborate with plasterboard installers:

• Commercial & Specialist Contractors
• Electricians
• Plumbers & Gas Fitters
• Painters
• Roofing Contractors
• Metal Fabricators & Welders
• Plasterers & Renderers
• Insulation Suppliers & Installers
• Waterproofers
• Garage Door Professionals
• Scaffolders & Shrink Wrap Installers
• Stonemasons
• Bricklayers
• Tilers
• Building Material Suppliers
• Building Waste Removal Services
• Cladding Professionals
• Construction Equipment Suppliers
• Lift Suppliers & Contractors
• Parking Designers & Installers
• Solar Power Installers & Suppliers
• Staircase Builders
• Balustrade Contractors
• Windows & Door Professionals
• Prefabricated Building Suppliers & Installers
• Demolition Contractors
• Excavating Contractors
• Joiners

Ready to line your next project? Shortlist Taranaki’s most trusted plasterboard and interior lining installers on ArchiPro and request quotes directly.