Joseph Giles Recessed Flush Pull Offset
by In Residence
Auckland
- 1.3M profile views
- 168 saves
This Joseph Giles Recessed Flush Pull Offset has a large grip which is suitable for both hinged and sliding doors. A minimum door thickness of 40mm is required when fitting two of these products back to back.
When fitting these products they will require bonding. This product has passed an installation strength test when fitted with Evo-stick mirror adhesive, however Joseph Giles have not tested the combination of this product and these adhesives on every possible door substrate and in every possible situation, so Joseph Giles would advise you run your own tests before installing this product with any adhesives, including Evo-stick mirror adhesive. Supplied as single items in all the Joseph Giles living and plated finishes.
Product Details
- Product
- Joseph Giles Recessed Flush Pull Offset
- Category
- Sliding Door Gear
- Sold by
- In Residence
- Range
- Joseph Giles
In Residence is specified by
Mason & Wales ArchitectsArchitects
Patchwork ArchitectureArchitects
TEAM Architects AucklandArchitects
Macfie ArchitectureArchitects
Stephen Jones ArchitectsArchitects
Herriot Melhuish O'Neill Architects LtdArchitects
Stevens Lawson ArchitectsArchitects
Abri ArchitectsArchitects
Condon Scott ArchitectsArchitects
Totem StudioArchitects
Four Walls ArchitectureArchitects
Julian Guthrie ArchitectureArchitects
Harper Interior DesignInterior Designers
Foley GroupInterior Designers
Mal Corboy DesignInterior Designers
Kitchens by DesignKitchen & Bathroom Designers
Triple Star ManagementBuilders
Formatt Bespoke Joinery Co.Carpenters & Cabinetmakers
Abbey Lang HomeInterior Designers
Du Bois Design LtdInterior Designers
Trinity ConstructionConstruction
Trinity Interior DesignInterior Designers
Deborah Still Interior DesignInterior Designers
Kitchen LinkKitchen & Bathroom Designers
A.One Kitchens + InteriorsInterior Designers
White InteriorsInterior Designers
Apt InteriorsInterior Designers
The WoodsmithsManufacturers and Suppliers
Creative Kitchens & InteriorsKitchen & Bathroom Designers
Turton Oliver Interior DesignInterior Designers
Queenstown Interiors NZInterior Designers
J Davis BuildersBuilders
Studio 28Interior Designers
Rabbitte JoineryKitchen & Bathroom Designers
Redmond BuildersBuilders
Neo DesignCarpenters & Cabinetmakers
Elizabeth KaramKitchen & Bathroom Designers
Entrance DesignInterior Designers
Bonham Art & DesignInterior Designers
Mark Scowen PhotographyPhotographers
Lume DesignInterior Designers
MacPherson Architecture LtdArchitectural Designers
QUATTRO UNOKitchen & Bathroom Designers
FocusplanInterior Designers
Barry Connor DesignArchitectural Designers
inherentInterior Designers
CV InteriorsInterior Designers
Eterno InteriorsInterior Designers
JKW Interior Architecture & DesignInterior Designers
DesignmarkedKitchen & Bathroom Designers
Blackwood InteriorsInterior Designers
Bremich CabinetmakersCarpenters & Cabinetmakers
Damn Good TilingTilers
Design BuildersBuilders
Izzard DesignInterior Designers
AppleTree DesignsInterior Designers
Landmark Homes Auckland - North Shore & RodneyBuilders
Andy Spain PhotographyPhotographers
Crompton's JoineryCarpenters & Cabinetmakers
Armstrong InteriorsInterior Designers
This Joseph Giles Recessed Flush Pull Offset has a large grip which is suitable for both hinged and sliding doors.
A minimum door thickness of 40mm is required when fitting two of these products back to back.
When fitting these products they will require bonding. This product has passed an installation strength test when fitted with Evo-stick mirror adhesive, however Joseph Giles have not tested the combination of this product and these adhesives on every possible door substrate and in every possible situation, so Joseph Giles would advise you run your own tests before installing this product with any adhesives, including Evo-stick mirror adhesive. Supplied as single items in all the Joseph Giles living and plated finishes.
- Specs
SF1014.01
- Width (mm) - 78
- Height (mm) - 152
- Thickness (mm) - 19
SF1014.02
- Width (mm) - 78
- Height (mm) - 300
- Thickness (mm) - 19
Downloads
Downloads (2)2 Direct downloads • 11 Available on request
Frequently asked questions about
Joseph Giles Recessed Flush Pull Offset
The Joseph Giles Recessed Flush Pull Offset is supplied by In Residence. It is also on their website, and you can browse every product In Residence lists on ArchiPro.
In Residence does not publish a price for the Joseph Giles Recessed Flush Pull Offset on ArchiPro. for pricing, or visit their website.
It is listed under Sliding Door Gear on ArchiPro, where you can compare it with sliding door gear from other suppliers.
Yes. It is part of the Joseph Giles range from In Residence, where you can see every product in the range together.
from this page, see their contact details on ArchiPro, or visit their website. The In Residence profile on ArchiPro has the rest of their products.
More products from
In Residence
The rest of this range, and everything else In Residence makes.
More in
Sliding Door Gear
Everything else in Sliding Door Gear, from every supplier on ArchiPro.
Supplier Reviews