Low Pressure Copper Wetback Electric Hot Water
by Rheem
Auckland, New Zealand
- 199.7K profile views
- 35 saves
Rheem Low Pressure Copper Wetback cylinders come in a range of sizes and configurations to suit the needs of most Kiwi homes looking to install or replace a wetback water heater*.
*Many councils have clean air requirements in place for urban areas. Check which fires and wetbacks you can install in your local city, district or regional council.
Product Details
- Product
- Low Pressure Copper Wetback Electric Hot Water
- Category
- Hot Water Cylinders
- Sold by
- Rheem
- Country of origin
- New Zealand
- Type of use
- Residential
- Installation
- Professional installation required
Rheem is specified by
Jack McKinney ArchitectsArchitects
RB StudioArchitects
Johnston ArchitectsArchitects
BOONArchitects
Studio Brick ArchitectsArchitects
Origin HeritageArchitects
106 ArchitectsArchitects
Dalman ArchitectsArchitects
Hurley ArchitectsArchitects
Condon Scott ArchitectsArchitects
VitruvionConstruction
Emandee HomesBuilders
Landmark Homes Auckland - North Shore & RodneyBuilders
Hallmark HomesDesign & Build
RCPProject Managers
Cogan Custom HomesBuilders
AD ArchitectureArchitectural Designers
Rheem Low Pressure Copper Wetback cylinders come in a range of sizes and configurations to suit the needs of most Kiwi homes looking to install or replace a wetback water heater*. *Many councils have clean air requirements in place for urban areas.
Check which fires and wetbacks you can install in your local city, district or regional council.
- Features
- Sizes range from 135L to 270L
- Options for left hand, right hand or bottom entry wetback connections
- A model to suit most replacement solutions
- Products in stock - no need to pre-order
- Sizes range from 135L to 270L
- Scope of use
Indoor Installation
- Specs / Details
Available in the following model configurations:
- WETBACK 14513513 | 135L | 560 x 950H | 2.0kW | BCRL
- WETBACK 16513513 | 135L | 510 x 1140H | 2.0kW | BCRL
- WETBACK 18513513 | 135L | 460 x 1465H | 2.0kW | BCRL
- WETBACK 12518015 | 180L | 610 x 1015H | 3.0kW | BCRL
- WETBACK 14318015 | 180L | 560 x 1220H | 3.0kW | RHSC
- WETBACK 14418015 | 180L | 560 x 1220H | 3.0kW | LHSC
- WETBACK 14518015 | 180L | 560 x 1220H | 3.0kW | BCRL
- WETBACK 54518013 | 180L | 540 x 1350H | 2.0kW | BCRL
- WETBACK 54518015 | 180L | 540 x 1350H | 3.0kW | BCRL
- WETBACK 16518015 | 180L | 510 x 1505H | 3.0kW | BCRL
- WETBACK 14522515 | 225L | 610 x 1250H | 3.0kW | BCRL
- WETBACK 16522515 | 225L | 560 x 1520H | 3.0kW | BCRL
- WETBACK 14527015 | 270L | 610 x 1465H | 3.0kW | BCRL
- WETBACK 16527015 | 270L | 560 x 1800H | 3.0kW | BCRL
- Sustainability Facts
- All Low Pressure Copper water heaters meet or exceed the NZ MEPS (Minimum Energy Performance Standards).
- The water heaters have recyclable valves. Recyclable cardboard packaging is used only on the top rim of the water heater, meaning there is no unnecessary waste.
- High quality Solstice ZD insulation allows the optimum water temperature to be maintained longer, which results in reduced energy usage and lower costs. Solstice ZD also has very low GWP (Global Warming Potential) and zero ozone-depleting properties.
- The Low Pressure Copper Wetback can be connected to a wood burner to recover heat and reduce the overall energy demands.
- The Wetback water heaters are light to transport.
- Warranty Note
Due to localised water conditions, Rheem New Zealand advise that any of our 'Rheem' branded Low Pressure Copper hot water cylinders are not suitable for installation in the postcode areas of 4120 and 4122 in the Hastings district. We confirm that these cylinders are outside of our Rheem Warranty water chemistry terms based upon recent testing and may result in subsequent pinhole corrosion. Despite not being covered under the Rheem warranty policy, on occasion, Rheem has voluntarily chosen to replace affected cylinders. This practice will cease for cylinders installed in the affected areas after 1 April 2022.
Downloads
Downloads (5)5 Direct downloads • 8 Available on request
Frequently asked questions about
Low Pressure Copper Wetback Electric Hot Water
The Low Pressure Copper Wetback Electric Hot Water is supplied by Rheem. It is also on their website, and you can browse every product Rheem lists on ArchiPro.
Rheem does not publish a price for the Low Pressure Copper Wetback Electric Hot Water on ArchiPro. for pricing, or visit their website.
It is listed under Hot Water Cylinders on ArchiPro, where you can compare it with hot water cylinders from other suppliers.
Yes. It is part of the Hot Water Heating for the Home range from Rheem, where you can see every product in the range together.
from this page, see their contact details on ArchiPro, or visit their website. The Rheem profile on ArchiPro has the rest of their products.
More products from
Rheem
The rest of this range, and everything else Rheem makes.
More in
Hot Water Cylinders
Everything else in Hot Water Cylinders, from every supplier on ArchiPro.






















