Choosing deck paints starts with the surface and the wear it will receive. An exterior coating needs explicit approval for decking exposed to foot traffic; the gloss designation in Weathershield® +PLUS Winterlock® Gloss by Dulux describes sheen, not suitability for foot traffic. Check the permitted application conditions against the forecast before specifying decking paint for an exposed deck in New Zealand, and allow the stated curing time before returning furniture to the boards.

Deck Paints

Compare deck paint colours beside the cladding and paving, using samples viewed in sun and shade. Both black decking paint and grey decking paint can vary in appearance with the light and the chosen sheen. Assess the gloss level of a product such as Weathershield® +PLUS Winterlock® Gloss separately from its colour, after confirming suitability for the deck. Dark finishes can become hotter in direct sun, so consider bare feet and the deck’s afternoon exposure when deciding on a shade.

What needs checking before specifying fibreglass deck paint?

Confirm that the coating is approved for fibreglass and for foot traffic, rather than relying on an exterior-use label. Follow the specified preparation and primer system for the existing surface.

Which decking paint brush suits timber boards?

Choose the bristle type and width recommended by the coating manufacturer. A brush that fits the board profile helps reach grooves and edges without leaving heavy deposits.

How should an existing timber deck be prepared?

Remove dirt and loose paint, treat mould as directed, and allow the boards to dry. Check the coating instructions before sanding or priming, particularly where an old stain remains.