Halley-P NO FLAME Two-Layer Membrane System
Viking Roofspec’s ‘Halley-P’ NO FLAME is a two-layer self-adhered bituminous membrane system, that employs a special adhesive and resins mixture that allows for excellent flame-free application. It is installed in the same staggered format as a traditional torch-on system, except that both layers are self-adhering. The use of a flame for a successful installation is not required.
Both the ceramic cap (black or grey) and base sheet membrane rolls, have a release paper on their underside, which makes installation very quick. The factory-applied adhesive has been specially formulated, so it cannot be combined with any other membrane type. This ensures the Halley-P NO FLAME ‘system’ is installed exactly as that – as a ‘system’. Once the roof installation is complete, the bond between the membrane layers to each other and to the substrate, continue to strengthen over time.
- CategorySelf Adhered Membranes
- RangeMembrane Roofing
- Warranty20 years
- Type of useCommercial and Residential
- InstallationProfessional installation required
Base Sheet
Finish: Sand, Thickness 3mm, Dimensions 1.0x10.0m
Cap Sheet
Colour: Black or Grey, Finish: Ceramic Chip, Thickness 4mm, Dimensions 1.0m x 8.0m
Viking Halley-P No-Flame is a two-layered bituminous membrane system; both layers of which are self-adhering ie: do not use a gas torch for installation. This system employs a special bitumen and adhesive resin mixture that allows for excellent flame-free application. A 4mm ceramic cap sheet is installed on top of a 3mm self-adhered base sheet.
- Roofs
- Decks
- Parapets
- Gutters
Halley-P’s chemical make-up is a hybrid of bitumen compounds which combine the tensile strength and puncture resistance of an APP (plasticised) bitumen, with the flexibility of an SBS (rubberised) bitumen.
- No Flame for installation
- Flexibility at low temperature
- Thermal ageing resistance
- UV resistance
- Tensile resistance
- Dimensional stability
- Resistance to tread
Halley-P’s temperature flexibility range means that it can be installed in areas with temperatures as low as (-25) deg. C up to +100 deg. C.
Applicable Climate Zone:
Pacific Islands and all New Zealand's Climate Zones
Other products
in this range
About the
Seller
Viking Roofspec is a market leading provider of quality waterproofing and roofing materials and is proud to be 100% owned and operated.
Keeping water on the outside.
Whether it's a home or commercial building, Viking's Roofing, Decking and below-ground waterproofing systems, keep water out and ensure it stays out... for good.
Viking Roofspec is a market-leading provider of quality roofing and waterproofing materials. We've been protecting properties in New Zealand, the Pacific Islands and even Antarctica for nearly 50 years.
We work closely with all key stakeholders during the development of a building or home. From design through to specification and installation, we provide advice and support where required. We take a full system approach to waterproofing to ensure a watertight, professional finish is achieved.