Self Adhered Membranes
- Peel-off backing allows self adhered membranes to be laid without a torch, though the substrate must be clean and dry for a secure bond.Self Adhered Membranes
Showing all 3 products
ArchiPro Products
Self-adhered membranes are used to manage water at roofs and foundations, with the right product depending on the building assembly and substrate. NOVATHERM Flameless Warm Roof System by Equus Industries and Viking Halley-P NO FLAME Waterproofing Membrane by Viking Roofspec are listed as membrane systems; check their technical information to confirm the intended application and installation requirements.
Self-adhered membranes
At junctions, corners and penetrations, detailing needs to maintain continuity between the membrane and adjoining surfaces. NOVA-SK Flameless Membrane System by Equus Industries and Majvest 500 SA by 5Merchants are also listed on this page. Before specifying a product, check substrate preparation, any primer requirements, lap dimensions and the sequence of work against its installation instructions.
Where is self adhered membrane flashing used?
Use flashing details at junctions and penetrations where water could pass behind the membrane. Follow the product instructions for laps and connections to adjoining materials.
What should self adhered membrane waterproofing be checked against?
Check the substrate, primer requirements and installation conditions against the manufacturer’s technical information. Confirm how the membrane connects to drains, edges and other waterproofing layers.
Can one membrane be used on every roof or foundation?
No single product should be assumed suitable for every assembly. Check its intended application and compatibility with the substrate and surrounding materials before specifying it.