HB1260 Double Recessed Blind Box for Motorised Roller Blinds

Halliday + Baillie

The Recessed Double Outward Hanging Blind Box Extrusion HB1260 is a blind system with sleek flush mounting to the ceiling plaster board (10mm or 13mm), primarily for two rows of automated blinds and screens for example where both sheer and black out blinds are required. Double Blind Box Extrusion – sold in 3m and 4.2 lengths in a draw finish only.

All Halliday + Baillie blind box extrusions are sold in specific lengths. We do however supply these lengths 80mm longer than the stated purchase length. The additional amount is to cover any damage to ends from the cutting process and to allow 25-40mm at either end to hold or jig the extrusion for either powder coating or anodising. We strongly recommend re-cutting ends to provide a clean finish before colouring and/or before installation.

Materials: Aluminium, raw unfinished. Raw extrusion can be powder coated or custom anodised by your preferred supplier. We recommend that clients cut to size on site before any finishing is undertaken.

For matching end caps please use the HB1265.

Blinds and any automation mechanisms not included. If specifying for manual blinds, the cover flap will need to be made approximately 30mm shorter at each end to allow for cord access. This is the responsibility of the client.

Details
  • Category
    Roller Blinds
Specs / Details

Product code: HB 1260

Halliday + Baillie
Auckland
Visit Website

About the
Seller

Halliday + Baillie