Rinnai Hot Water Commercial Pumps
by Rinnai
- 385.5K profile views
- 86 saves
Rinnai has a number of pump arrangements which are assembled in NZ, factory tested and programmed. They are suitable for floor or wall mounting. The pump systems are assembled on a stainless steel base/wall frame and are controlled by the Rinnai DDTSTAT234 pump controller with a 1.5 m thermostat cable (10 m cable also available).
On each pump stream:
- inlet and outlet ball valves
- non-return and strainer
Product Details
- Product
- Rinnai Hot Water Commercial Pumps
- Category
- Air to Water Heat Pumps
- Sold by
- Rinnai
- Range
- Demand Duo
Rinnai is specified by
Hurley ArchitectsArchitects
Studio Pacific ArchitectureArchitects
RB StudioArchitects
Hark ArchitectsArchitects
Young ArchitectsArchitects
Francis Gp ArchitectsArchitects
Stephen Jones ArchitectsArchitects
Ponting Fitzgerald ArchitectsArchitects
Condon Scott ArchitectsArchitects
Jeff Brickell ArchitectsArchitects
Shaw & Shaw ArchitectsArchitects
Carnachan ArchitectureArchitects
Johnston ArchitectsArchitects
Salmond Reed ArchitectsArchitects
Hulena ArchitectsArchitects
Daniel Marshall ArchitectsArchitects
Open ArchitectureArchitects
Abri ArchitectsArchitects
prauArchitects
Studio Brick ArchitectsArchitects
Koia ArchitectsArchitects
Dorrington Atcheson ArchitectsArchitects
RuamokoStructural Engineers
LifeStyle Architectural ServicesArchitectural Designers
R&B BuildBuilders
Tibbits + CoLandscape Designers
Slate ConstructionDesign & Build
Entrance DesignInterior Designers
PlumbgenixPlumbers & Gas Fitters
Ardmore ArchitectsArchitecture & Design
Studio 28Interior Designers
3Dimensional BuildersBuilders
CV InteriorsInterior Designers
Fleetwood ConstructionBuilders
Touchwood Solidwood HomesBuilders
Lufdon PlumbingPlumbers & Gas Fitters
Ferguson BuildersBuilders
Advance BuildBuilders
KPA PlumbingPlumbers & Gas Fitters
BUILT CHCHBuilders
Home and LifestyleDesign & Build
TricklebanksPlumbers & Gas Fitters
Yellowfox InteriorsInterior Designers
Noel Jessop ArchitectureArchitectural Designers
TotalbuildBuilders
New Zealand Green Building CouncilAssociations
staceyfarrell.comArchitecture & Design
David Reid HomesDesign & Build
Arcline ArchitectureArchitectural Designers
Plumbing and Heating Centre LtdPlumbers & Gas Fitters
eHausDesign & Build
Turner Road ArchitectureArchitectural Designers
Creative ArchArchitectural Designers
McBrimarDesign & Build
The House CompanyBuilders
Sorted ArchitectureArchitectural Designers
ATL AutomationHome Automation Consultants
Maddren HomesBuilders
ataArchitectural Designers
Cogan Custom HomesBuilders
Rinnai has a number of pump arrangements which are assembled in NZ, factory tested and programmed.
They are suitable for floor or wall mounting. The pump systems are assembled on a stainless steel base/wall frame and are controlled by the Rinnai DDTSTAT234 pump controller with a 1.5 m thermostat cable (10 m cable also available).
On each pump stream:
- inlet and outlet ball valves
- non-return and strainer
Downloads
Downloads (2)2 Direct downloads • 7 Available on request
Installers for
this Product
Frequently asked questions about
Rinnai Hot Water Commercial Pumps
The Rinnai Hot Water Commercial Pumps is supplied by Rinnai. It is also on their website, and you can browse every product Rinnai lists on ArchiPro.
Rinnai does not publish a price for the Rinnai Hot Water Commercial Pumps on ArchiPro. for pricing, or visit their website.
It is listed under Air to Water Heat Pumps on ArchiPro, where you can compare it with air to water heat pumps from other suppliers.
Yes. It is part of the Demand Duo range from Rinnai, where you can see every product in the range together.
from this page, see their contact details on ArchiPro, or visit their website. The Rinnai profile on ArchiPro has the rest of their products.
More products from
Rinnai
The rest of this range, and everything else Rinnai makes.
More in
Air to Water Heat Pumps
Everything else in Air to Water Heat Pumps, from every supplier on ArchiPro.
