Skip to main content

Where to buy roof trusses: timber and steel framing

featuring ArchiPro

ArchiPro logo
  • 1.7M profile views
  • 1.4K saves

Find where to buy roof trusses on ArchiPro in New Zealand, with hardwood trusses and timber and steel framing listings.

Visit Website

Hardwood Trusses is listed by Hardwood by LMA Timber, which can supply or fabricate trusses to building-plan requirements. J-Frame 8 is listed by Juken New Zealand Ltd as framing timber that can be used in truss systems. See every Roof Frames & Trusses listing on ArchiPro.

Where to buy roof trusses in New Zealand?

Hardwood by LMA Timber lists Hardwood Trusses on ArchiPro in New Zealand and can supply or fabricate them to the requirements of building plans. The LMA Timber trusses can serve an aesthetic purpose or be structurally certified, with a range from F17 to F34. The fabrication route depends on the project.

When fabrication is necessary at the supplier’s mill in Australia, the listing says the trusses are assembled, disassembled and then shipped to New Zealand. It also notes that many builders prefer manufacture and assembly on site to accommodate inaccuracies in the build, rather than ordering trusses prefabricated from the plans.

The professional listing for Hardwood by LMA Timber includes structural hardwood posts, beams and trusses among its services. Its other services include interior and exterior cladding, flooring and decking, joinery, and landscaping timbers.

Structural hardwood dimensions

Hardwood by LMA Timber also lists Structural Hardwood - Spotted Gum / Grey Iron Bark under both Beams & Columns and Roof Frames & Trusses. The listing offers a related source of solid hardwood for a project where timber dimensions and fabrication are part of the enquiry.

Its stated capability covers solid timbers up to 400 x 400 mm thick and up to 12.0 m long, alongside custom fabrication solutions. Custom lengths and dimensions are also offered. The supplier describes reclaimed and sustainable hardwood timbers as available for projects including commercial work and residential pergolas.

That dimensional information belongs to the structural hardwood listing. Hardwood Trusses has its own description covering building-plan requirements, fabrication and the F17 to F34 range.

What framing timber can be used in truss systems?

J-Frame 8, supplied by Juken New Zealand Ltd, is a general-purpose structural laminated veneer lumber, or LVL, framing timber whose listed applications include truss systems. Juken manufactures it from renewable plantation radiata pine. It is also described for residential and commercial framing and is CodeMark certified.

J-Frame 11 is another Juken New Zealand Ltd listing, appearing under Roof Frames & Trusses and Wall Framing. Juken New Zealand engineered and manufactured it as a CodeMark-certified wood framing solution for residential and commercial work. The J-Frame 8 listing says both J-Frame 8 and J-Frame 11 are available in Pryda and MiTek design software.

That gives truss manufacturers a way to incorporate the products into established design workflows. The listings describe framing products rather than a fabricated truss package.

Juken New Zealand Ltd

Juken New Zealand Ltd is the supplier behind the J-Frame 8 and J-Frame 11 listings. Its professional profile describes a New Zealand-based and registered company involved in forestry and wood processing, with J-Frame and wood building materials among its listed services. The product records distinguish the applications stated for each listing.

J-Frame 8 names residential and commercial framing and truss systems; J-Frame 11 is listed in the roof frames and trusses as well as the wall framing categories. Both records describe CodeMark-certified engineered wood products. Alongside J-Frame, the professional profile lists Triboard, forestry and wood processing.

Those services give context to the company’s framing listings without changing the specifications recorded for either J-Frame product.

Macrocarpa and cypress timber

MacDirect lists Posts/ Beams custom cut up to 400/400 #1 & SG8* as structural and framing material. The listing names trusses among the popular uses for its macrocarpa and cypress timbers, along with beams, pergolas and posts. MacDirect supplies the posts and beams up to 400 x 400 mm square.

Its listing identifies 300 x 300 mm and 200 x 200 mm as popular post sizes, and 200 x 100 mm to 300 x 150 mm as popular SG8 beam sizes. These are timber dimensions rather than dimensions for a completed truss. The MacDirect professional profile lists posts, beams and framing among its services.

It also says the business operates sawmills and supplies weatherboard, sarking, framing including SG8, and finishing clears.

Steel for framing

Axxis® Steel for Framing lists Steel for Framing under Roof Frames & Trusses and Wall Framing. Made by New Zealand Steel, Axxis® steel is galvanised, high-tensile steel designed for New Zealand’s house-framing market. The Axxis® Steel for Framing professional profile lists steel for framing, framing, light commercial, new builds, construction and architectural builds as services.

Its product listing gives buyers looking through roof-frame options a steel framing material to compare with the hardwood and engineered wood listings. A project credited to the professional, Waihi Bach built with AXXIS® & COLORSTEEL®, describes the use of AXXIS® steel framing in a coastal bach. It is listed under Beach House and Urban.

J-Frame in listed projects

Two projects credited to Juken New Zealand Ltd show J-Frame used in framing. Straight, Strong and Consistent: J-Frame Impresses on Rotorua Family Home is a contemporary project in the Bay of Plenty, completed in 2026.

Its description identifies J-Frame as engineered framing made from certified renewable radiata pine and includes the builder’s account of straight studs. Sprout Architects’ Office: Precision and Performance with J-Frame describes the use of the engineered LVL framing system for an office project.

Sprout Architects selected it for dimensional stability, consistency and freedom from knots and warping. The project record says components could be manufactured from computer-generated cut lists, supporting a panelised construction approach. Both records illustrate framing applications. The J-Frame 8 product listing is the record that expressly includes truss systems among its applications.

A MacDirect project

Palmerston North - Supreme Build is a residential project credited to MacDirect and completed in 2022. For someone comparing the supplier’s timber listings, it shows a different use of macrocarpa in a finished house. The project record names MD61 (Standard Bevel Back 140) as the product used.

It describes band-sawn macrocarpa weatherboards alongside Belgian tumbled bricks and long-run steel roofing. The 312 m² house has an H-shaped plan on the rural outskirts of the city. Those project details concern weatherboards rather than trusses.

MacDirect’s Posts/ Beams custom cut up to 400/400 #1 & SG8* listing is the one that names trusses as a use for its macrocarpa and cypress timbers.

Related roofing material

Roof framing buyers may also look at a separate roof material listing: COLORSTEEL® for Insulated Panels, supplied by COLORSTEEL®. It was developed for insulated panel applications and is listed under Roof & Ceiling Insulation, Steel Roofing and Structural Wall Panelling.

The product comprises either a traditional zinc-coated or Zincalume® steel substrate combined with a custom-formulated paint system. Its record names Metalcraft Insulated Panels, Freeman Group, Conqueror, Bondor and Expol among manufacturers using the material. COLORSTEEL® is listed as a roofing, cladding and building material supplier, based in Glenbrook.

The product is an insulated-panel material, separate from the truss and framing listings.

How the listed truss and framing options differ

Hardwood Trusses is the listing that describes supplying or fabricating trusses to building plans. Its structural certification range and assembly arrangements are specific to that product. Structural Hardwood - Spotted Gum / Grey Iron Bark instead gives solid-timber dimensions and custom fabrication capability.

J-Frame 8 identifies a use in truss systems, while J-Frame 11 is an engineered framing product listed in the roof-frame category. Posts/ Beams custom cut up to 400/400 #1 & SG8* names trusses as a popular use for macrocarpa and cypress timber and gives post and beam sizes.

Steel for Framing differs in material: it is galvanised, high-tensile steel for house framing. COLORSTEEL® for Insulated Panels belongs to the separate insulated-panel and roofing material categories, rather than the framing products described above.

The ArchiPro editorial team put this guide together from the listings businesses publish on ArchiPro in New Zealand, as at November 2026. Every product, professional and project named here links to its own listing, where you can see its full details and contact the business directly.

Like this Article?
Get in touch with ArchiPro

Credits

Next Article

Keep scrolling
The Art of Making Complexity Disappear